标签： readilink

ReadiLink iFluor 633 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1260      产品名称： ReadiLink iFluor 633 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 633 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1260
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 638
Em (nm) 655  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are developed for labeling proteins, in particular, antibodies. These dyes are optimized to have minimal fluorescence quenching effect on proteins and nucleic acids. Our iFluor� 633 dyes have fluorescence excitation and emission maxima close to ~633 nm and ~655 nm respectively with good photostability. Our in-house comparable studies indicated that our iFluor� 633 dyes are significantly brighter than the corresponding Cy5�. These spectral characteristics make them a superior alternative to Cy5� and Alexa Fluor�633 (Cy5� and Alexa Fluor� are the trademarks of GE Healthcare and Invitrogen respectively). iFluor� 633 conjugates have been widely used in fluorescence animal imaging applications. ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 633 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 633 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 633 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 633 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)
 

 

ReadiLink iFluor 790 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1265      产品名称： ReadiLink iFluor 790 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 790 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1265
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 782
Em (nm) 811  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are developed for labeling proteins, in particular, antibodies. These dyes are optimized to have minimal fluorescence quenching effect on proteins and nucleic acids. iFluor� 790 dyes have fluorescence excitation and emission maxima close to 790 nm and 810 nm respectively. These spectral characteristics make them an excellent alternative to IRDye� 800 (IRDye� is the trademark of Li-COR). Our in-house comparable studies indicated that our iFluor 790 dyes are significantly brighter than the corresponding IRDye� 800. iFluor� 790 conjugates have been widely used in fluorescence animal imaging applications. ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 790 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 790 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 790 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 790 SE.
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

 

ReadiLink iFluor 350 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1220      产品名称： ReadiLink iFluor 350 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 350 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1220
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 345
Em (nm) 442 
Solvent DMSO
AAT Bioquest’s iFluor� dyes are optimized for labeling proteins, in particular, antibodies. These dyes are bright, photostable and have minimal quenching on proteins. They can be well excited by the major laser lines of fluorescence instruments (e.g., 350, 405, 488, 555 and 633 nm). iFluor� 350 dyes have fluorescence excitation and emission maxima of ~350 nm and ~440 nm respectively. These spectral characteristics make them an excellent replacement to AMCA and Alexa Fluor� 350 labeling dye (Alexa Fluor� is the trademark of Invitrogen). ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 350 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 350 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 350 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 350 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

ReadiLink iFluor 555 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1227      产品名称： ReadiLink iFluor 555 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 555 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1227
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 559
Em (nm) 569  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are optimized for labeling proteins, in particular, antibodies. These dyes are bright, photostable and have minimal quenching on proteins. They can be well excited by the major laser lines of fluorescence instruments (e.g., 350, 405, 488, 555 and 633 nm). iFluor� 555 dyes have fluorescence excitation and emission maxima of ~550 nm and ~570 nm respectively. iFluor� 555 family has the spectral properties essentially identical to those of Cy3� (Cy3� is the trademark of GE Healthcare). Compared to Cy3 probes iFluor� 555 family has much stronger fluorescence and higher photostability. Their fluorescence is pH-independent from pH 3 to 11. These spectral characteristics make this new dye family a superior alternative to Cy3�. iFluor� 555 family has become an excellent replacement to Cy3 and Alexa Fluor� 555 labeling dye (Alexa Fluor� is the trademark of Invitrogen). ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 555 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 555 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 555 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 555 SE. 
Detailed Information:   Protocol   References   MSDS   Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

 

ReadiLink iFluor 594 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1230      产品名称： ReadiLink iFluor 594 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 594 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1230
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 592
Em (nm) 614  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are optimized for labeling proteins, in particular, antibodies. iFluor� 594 dyes have fluorescence excitation and emission maxima of ~590 nm and ~610 nm respectively. iFluor� 594 family has the spectral properties similar to those of Texas Red� and Alexa Fluor� 594 (Texas Red� and Alexa Fluor� 594 are the trademarks of Invitrogen). iFluor� 594 family is pH-independent from pH 3 to 11. These spectral characteristics make this new dye family an excellent alternative to Texas Red� and Alexa Fluor� 594.Compared to Texas Red�, iFluor� 594 is much easier to be conjugated with RPE with much higher conjugation yield, and the resulted RPE-iFluor� 594 tandem has better FRET efficiency.ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 594 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 594 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 594 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 594 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

ReadiLink iFluor 647 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1235      产品名称： ReadiLink iFluor 647 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 647 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1235
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 654
Em (nm) 674  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are optimized for labeling proteins, in particular, antibodies. These dyes are bright, photostable and have minimal quenching on proteins. They can be well excited by the major laser lines of fluorescence instruments (e.g., 350, 405, 488, 555 and 633 nm). iFluor� 555 dyes have fluorescence excitation and emission maxima of ~550 nm and ~570 nm respectively. iFluor� 647 family has the spectral properties essentially identical to those of Cy5� (Cy5� is the trademark of GE Healthcare). Compared to Cy5 probes iFluor� 647 family has much stronger fluorescence and higher photostability. Their fluorescence is pH-independent from pH 3 to 11. These spectral characteristics make this new dye family a superior alternative to Cy5�. iFluor� 647 family has become an excellent replacement to Cy5 and Alexa Fluor� 647 labeling dye (Alexa Fluor� is the trademark of Invitrogen). ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 647 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 647 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 647 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 647 SE.
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

ReadiLink iFluor 680 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1240      产品名称： ReadiLink iFluor 680 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 680 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1240
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 682
Em (nm) 701  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are optimized for labeling proteins, in particular, antibodies. These dyes are optimized to have minimal fluorescence quenching effect on proteins and nucleic acids. Our iFluor� 680 dyes have fluorescence excitation and emission maxima close to 680 nm and 700 nm respectively with good photostability. These spectral characteristics make them an excellent alternative to Cy5.5�, IRDye� 700 and Alexa Fluor� 680 (Cy5.5�, IRDye� and Alexa Fluor� are the trademarks of GE Healthcare, Li-COR and Invitrogen respectively). ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 680 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 680 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 680 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 680 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

 

ReadiLink iFluor 700 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1245      产品名称： ReadiLink iFluor 700 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 700 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1245
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 693
Em (nm) 713  
Solvent DMSO
AAT Bioquest’s iFluor� dyes are developed for labeling proteins, in particular, antibodies. These dyes are optimized to have minimal fluorescence quenching effect on proteins and nucleic acids. iFluor� 700 dyes have fluorescence excitation and emission maxima close to 690 nm and 710 nm respectively. These spectral characteristics make them an excellent alternative to Alexa Fluor� 700 (Alexa Fluor� is the trademark of Invitrogen). ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 700 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 700 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 700 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 700 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

ReadiLink iFluor 750 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1250      产品名称： ReadiLink iFluor 750 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit 二周到货 生化试验

ReadiLink� iFluor� 750 Antibody Labeling Kit *Microscale Optimized for Labeling 50 礸 Antibody Per Reaction*
Cat # 1250
Storage F/D/L (see storage codes below)
Unit Size 2 Labelings
Ex (nm) 753
Em (nm) 779 
Solvent DMSO
AAT Bioquest’s iFluor� dyes are developed for labeling proteins, in particular, antibodies. These dyes are optimized to have minimal fluorescence quenching effect on proteins and nucleic acids. Our iFluor� 750 dyes have fluorescence excitation and emission maxima close to 750 nm and 780 nm respectively with good photostability. Our in-house comparable studies indicated that our iFluor� 750 dyes are significantly brighter than the corresponding Cy7� and Alexa Fluor� 750. These spectral characteristics make them a superior alternative to Cy7� and Alexa Fluor� 750 (Cy7� and Alexa Fluor� are the trademarks of GE Healthcare and Invitrogen respectively). iFluor� 750 conjugates have been widely used in fluorescence animal imaging applications. ReadiLink� labeling kits essentially only require 2 simple mixing steps without a column purification needed. iFluor� 750 SE used in this ReadiLink� kit is reasonably stable and shows good reactivity and selectivity with protein amino groups. The kit has all the essential components for labeling ~2×50 ug antibody. Each of the two vials of iFluor� 750 dye provided in the kit is optimized for labeling ~50 礸 antibody. iFluor� 750 SE protein labeling kit provides a convenient method to label monoclonal, polyclonal antibodies or other proteins (>10 kDa) with the iFluor� 750 SE. 
Detailed Information:   Protocol      References      MSDS      Spectrum
Related Products:     iFluor� Dyes and Kits     General proteins     Labeling via Amino Groups 
Storage Codes:
  D = Desiccated
  L = Avoid light
  F = Freeze (<-15 癈)
  R = Refrigerated (2-4 癈)
  RT = Room temperature (4-50 癈)

 

 

ReadiLink iFluor 780 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*

货号： 1255      产品名称： ReadiLink iFluor 780 Protein Labeling Kit *Microscale Optimized for Labeling 100 μg Antibody Per Reaction*   品牌： AAT 规格： 1 kit